APC Back-UPS 1400VA, 230V, AVR, IEC Sockets BX1400UI
APC’s Back-UPS 1400 protect your electronic equipment from damage due to power outages,surges and spikes while providing short term battery power during an outage. The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics,saving battery power for when you need it most during storms and power outages. Additionally,Australian sockets make for easy-to-use connection of protected equipment.
BX1400UI Features-APC Back-UPS 1400VA, 230V, AVR, IEC Sockets
- Automatic restart of loads after UPS shutdown
- Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic Voltage Regulation (AVR)
- Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
- Resettable circuit breaker
- Easy recovery from overloads; no need to replace a fuse.
- Telephone dataline surge protection
- Provides protection of connected equipment from power surges traveling on telephone lines.
- USB connection
- Use your PC to access additional power protection and management features for your UPS via a USB Port.
Back-UPS Features & Benefits
Marketing Features
- Battery-protected and surge-only outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Manageability
- Audible alarms
- Provides notification of changing utility power and UPS power conditions
- LED status display
- Quickly understand unit and power status with visual indicators.
Safety
- Safety-agency approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
- Intelligent battery management
- Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Battery failure notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Automatic self-test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Protection
- Surge only outlets
- Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Battery and surge protected outlets
- Back up and protect your hardware and data during power outages, surges and spikes.
Print Technical Specification 
Output
- Output power capacity
700Watts / 1.4 kVA
- Max Configurable Power (Watts)
700Watts / 1.4 kVA
- Nominal Output Voltage
230V
- Output Frequency (sync to mains)
50/60 Hz +/-1 Hz
- Output Frequency (not synced)
50/60 Hz +/-1 Hz
- Topology
Line Interactive
- Waveform type
Stepped approximation to a sinewave
- Output Connections(2) IEC Jumpers (Battery Backup)(6) IEC 320 C13 (Battery Backup)
- Transfer Time
8ms typical : 10 ms maximum
Input
- Nominal Input Voltage
230V
- Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections
IEC-320 C14
- Cord Length
1.22meters
- Input voltage range for main operations
150 – 280 V
- Number of Power Cords
1
- Type of Input Protection Required
3-pole breaker
- Maximum Input Current
6.0A
- Input Power Factor at Full Load
0.5
Batteries & Runtime
- Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time
8hour(s)
- Expected Battery Life (years)
2 – 5
- RuntimeView Runtime Chart
- Efficiency
Communications & Management
- Interface Port(s)
USB
- Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating
273Joules
- Data Line Protection
RJ-11 Modem/Fax protection
Power and Electricals
