Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO)
The Ubiquiti UniFi U6-Pro is a professional-grade dual-band WiFi 6 access point built to deliver superior wireless performance in high-density environments. Combining next-generation 802.11ax (WiFi 6) technology with enterprise-grade reliability, the U6-Pro provides up to 5.3 Gbps aggregate throughput across its 2.4 GHz and 5 GHz bands.
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) delivers fast dual-band speeds with 2.4 GHz and 5 GHz radios using WiFi 6 technology.
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) features 4×4 MU-MIMO and OFDMA on the 5 GHz band, reaching up to 4.8 Gbps.
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) supports high client density environments with stable, low-latency connections.
Powered by PoE+, the Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) simplifies installation with a single Ethernet cable.
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) comes with IP54-rated housing for semi-outdoor and indoor ceiling or wall mounting.
Ubiquiti UniFi Access Point WiFi 6 Pro (U6-PRO) integrates with UniFi Network for centralized management, monitoring, and updates.
With its 5 GHz (4×4 MIMO) and 2.4 GHz (2×2 MIMO) bands, the U6 Pro can achieve an aggregate throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable wireless experience throughout your entire network. It can also isolate your guest traffic for maximum security and performance.
Ubiquiti UniFi U6-PRO Key Features
- Dual-band WiFi 6 (802.11ax)
- 5 GHz (4×4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
- 2.4 GHz (2×2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
- Operates at full 4×4 MIMO with 160 MHz bandwidth
- 300+ concurrent client capacity
- Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
- Included universal mounting plate, backing plate, and screw kit
Ubiquiti UniFi U6-PRO – Technical Specifications
Mechanical
- Dimensions: Ø197 x 35 mm (Ø7.76 x 1.38″)
- Weight Without mount: 460 g (1.01 lb)
- With mount: 600 g (1.32 lb)
- Enclosure material: Plastic
- Mounting material: SGCC steel
- Weatherproofing: IP54
Hardware
- Management interfaces: Ethernet, Bluetooth
- Networking interface: (1) GbE RJ45 port
- Button: Factory reset
- LED*: White/blue
- Power method: 802.3at PoE+
- Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
- Supported voltage range: 44 to 57VDC
- Max. power consumption: 13W
- Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
- MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
- Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
- Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
- Mounting: Wall/ceiling (included)
- Operating temperature: -30 to 60° C (-22 to 140° F)
- Operating humidity: 5 – 95% noncondensing
- Certifications: CE, FCC, IC
*Due to chip supply shortages, the U6 AP’s LED has been limited to only white and blue color modes.
Software
- WiFi standards: 802.11a/b/g
- WiFi: 4/WiFi 5/WiFi 6
- Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
- BSSID: 8 per radio
- VLAN: 802.1Q
- Advanced QoS: Per-user rate limiting
- Guest traffic isolation: Supported
- Concurrent clients: 300+
- Zero wait DFS: Yes*
*Supported with upcoming firmware versions
Supported Data Rates (MBPS)
- 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b 1, 2, 5.5, 11 Mbps
- 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40)
- 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160)1ax (WiFi 6) 7.3 Mbps to 4.8Gbps (MCS0
- alUbiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)Ubiquiti UniFi AP WiFi 6 Mesh Access Point (U6-MESH)so check
Also check
